Tel/Fax: +39 055.828315 info@motusport.it / Facebook
Tel / Fax: +39 055.828315 info@motusport.it / Facebook
Sports Passion
Email

ROLLER HOMETRAINER TACX FLUX S SMART TT2900

RULLO HOMETRAINER TACX FLUX S SMART TT2900.jpgRULLO HOMETRAINER TACX FLUX S SMART TT2900.jpg
-22%VAT for EXTRA EU Countries
Price:
599,00 €
569,05 €
Sconto: 5%
Quantità:
logo-tacx
Description
ROLLER HOMETRAINER TACX FLUX S SMART TT2900
The FLUX S Smart fully complies with all the criteria of those looking for a Smart direct transmission trainer. Reliable, precise, silent, strong and able to provide an excellent running sensation. This bike trainer is the ideal companion for indoor training, in the long hours spent pedaling with the favorite apps.

Features and Specifications

features
Type of trainer Smart interactive direct transmission with electric brake
Magnets 8 neodymium magnets
Transmission None
Electrical requirements 110-240 Volt
Power indicator (in watts) Nobody
Connection indicator (ANT / BT) 2 LEDs
Possibility of updating the Firmware Yup
Suitable boxes Shimano & SRAM: 8 t / m 11 speed. Campagnolo bodice sold separately
Suitable axles Rear fork width: 130 mm racing bike, 135 mm MTB. Adapters for other widths available
Suitable bicycles Race, triathlon & MTB
With One month subscription to the Tacx Premium software. , Quick release for road bikes and mountain bikes (5 mm)
specifications
Max power (40 km / h) 1500 Watt
Max. Incline 10%
Descent simulation No
Couple max. 22.1Nm
Braking force max. 65N
They fly Physical 7kg
Mass inertia 22.8 kg
Calibration Deceleration
Overall dimensions (lxp) 670 x 642 mm (26.4 x 25.3 in)
Height 460 mm (18.1 in)
Product dimensions folded (lxpxh) Not foldable
Weight 22.8 kg
Article number T2900S
data output and control
Wireless communications Smart technology

Smart technology means intelligent electronic systems used to communicate. Tacx Smart Trainers connect to any device and multiple devices simultaneously and communicate via ANT + and Blueooth Smart®.

Tacx Smart trainers are distinguished by the following features:
1. Open wireless communications
2. Measurement and reception of performance data
3. Possibility of updating the firmware
4. Independent training

Open wireless communications
The Tacx Smart trainer's capabilities improve if you enable communications with as many devices and apps as possible. In this way you can use almost any training option via standardized wireless communication protocols: ANT + FE-C and Bluetooth Smart open.

The ANT + FE-C protocol
The ANT + FE-C protocol allows Smart trainers to communicate with third-party software on desktops, bike computers and sports watches. Interactive trainers can be controlled by the Tacx software or by software such as Zwift and Garmin Edge 520.

We started moving as soon as ANT + launched the ANT + FE-C protocol. Result: our indoor trainers were the first to obtain the ANT + FE-C certification and use the new language. ANT + FE-C stands for "ANT + Fitness Equipment Control". So far the trainers of different brands communicated each in their own language, so they did not understand each other and could not communicate with each other. By implementing the new language, the open profile ANT + FE-C, trainers and software are now able to communicate and connect with each other.

Bluetooth Smart
This technology, also called Bluetooth 4.0 and Bluetooth low energy, allows you to communicate with smartphones, tablets and sports watches. With Bluetooth Smart, interactive trainers are controlled by Tacx apps and apps like TrainerRoad and Kinomap.

After the creation of the open protocol ANT + FE-C we started to create an open protocol for Bluetooth. Smartphones and tablets can often only receive the Bluetooth signal and not the ANT + signal. By sending the same language of the ANT + FE-C protocol via Bluetooth, the Smart trainers can also communicate with third-party apps on devices with only the Bluetooth receiver. This protocol was created by Tacx and is available to software producers, so that everyone can connect the Tacx Smart trainer to their favorite software.

Connecting to different devices at the same time!
Using both communication protocols, the trainer can connect to different devices simultaneously. For example, you can follow a Tacx movie on your tablet while reading and storing performance data in Garmin Connect on your bike computer. This way you can control the performance in your favorite apps.

Measurement and reception of performance data
All Tacx Smart trainers measure speed, cadence and power and transmit them via ANT + and Bluetooth Smart, so that different devices can receive them at the same time. Interactive trainers can also receive signals to adjust resistance.

To receive the heart rate you need a special monitor that can communicate via ANT + or Bluetooth 4.0. The monitor is connected to the app in use, which in turn communicates with the trainer.

Possibility of updating the firmware
Tacx commits itself to constantm

Codice: RULLO HOMETRAINER TACX FLUX S SMART TT2900

Joomla SEF URLs by Artio
INFORMATION
RETURNED ITEMS

Returned items for changing size

PAYMENTS

Pay Pal, bank transfer, Cash on delivery(in Italy till 499€)

SHIPMENT

Shipping traceable in Italy and abroad with express courier

Newsletter

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of the site have already been set. privacy policy.

I accept cookies from this site.