Tel/Fax: +39 055.828315 info@motusport.it / Facebook
Online sale at a discounted price Deda Superbox, one stem, four mounting options and cable routing.
Don't be fooled by the aesthetic appearance and shapes that recall the previous version. Two holes have been made on the underside of the attachment to allow the cables of the braking system to pass through.
This solution allows you to choose between four different cable routing modes: DCR (Deda internal cable routing), S-DCR, direct and external.
The fully integrated cable routing is achieved when the Deda Superbox stem is combined with any Deda DCR handlebar.
This system allows you to bypass the cover which is used instead to route the cables in the semi-integrated version (S-DCR) .
A solution, the latter, which allows you to carry out installation, adjustment or maintenance without particular complications to the point of being very useful when you have to adapt to a new bicycle.
During the test phase, in fact, it is possible to mount the cables through the openable plastic cover. Once the right set-up has been found, it is possible to move on to the integrated passage.
Superbox can be mounted on a traditional 1-1/8” steerer tube and is compatible with a 46 mm (for 1-1/8” bearing) or 56 mm (for 1.5” bearing) frame head tube. The configuration is completed by a series of openable spacers (10 or 20 mm) with special channels for the passage of cables.
The body is made of 6061 aluminum alloy with a POB (Polish on black) finish, reproposing the flat shape of the previous generation with an angle of 82° and a height of 32 mm (47 mm with the cover).
Eight sizes available : 90, 100, 110, 120, 130, 140 to which you can add the 70 and 80 mm attachments particularly suitable for gravel/mtb.
The addition of the 70 and 80 mm sizes makes the Superbox stem the best choice for mtb and gravel bikes too. Available in POB (Polish on black) finish.
The new stem weighs 175 g in the 110 mm version.
The upper thicknesses of the head tube developed by Deda make the component compatible with the bikes of the main brands: Bianchi, Cervélo, Colnago, Orbea, Pinarello, Ridley, Trek, Wilier, etc.).
HERE the complete list with all the details.
In addition to the two holes for the passage of cables and the measurements, the novelties focus on the front panel made up of two completely revised independent plates. Here a clip (D-Clip, supplied as standard) has been added between the two blocks which makes the design even cleaner as well as limiting the entry of dirt and debris.
The Deda Superbox stem is accompanied by a cyclocomputer support (Superbox mount kit, item code SBOXMOUNTKIT) that can be integrated into the front panel made of reinforced nylon and glass fiber which stops the needle at 35 g .
The support, available as an accessory, includes three different inserts for Garmin (500, 800, 1000 series), Bryton, Wahoo as well as the GoPro action camera attachment located in the lower part.
The system is also fully compatible with the previous version of the Superbox stem. In addition to the cycle computer holder, it will be enough to purchase the new front panel (item code FCSBX-DCR).
CALL US