ENDA ITEN 2

ITEN has its vocation in its name. Iten, is a small Kenyan town located in the Great Rift
Valley which produced the highest number of gold medals in the cross-country and medium-sized specialties
bottom in competitions that really matter in running such as Olympics and World Championships, and it is also
known as the home of champions.
It is a shoe with a vocation for performance that accompanies runners on medium distances a
good pace without forgetting protection and cushioning if you want to push yourself further,
inviting to the midfoot support for a run that is as natural and efficient as possible.
Here are the characteristics of the ITEN 2
The upper is in engineered mesh (triple yarn) with a tight weave to better contain the foot in
all stages of support and is structured with a second layer to wrap the entire area of the fingers
of the feet to eliminate the problem of mesh failure in that area subjected to stress
high when the ride is particularly fast. In the internal portion at the level of the first
metatarsal coupling is interrupted in order not to limit in any way the flexion of the midsole
during the push and pre-release phase of the foot from the ground.
The texture, as mentioned, tightly knit in the forefoot portion does not lose its naturals
characteristics of breathability, in the portion that wraps the body of the foot and integrates
with the lace-through structure, the shirt opens with decidedly wider inserts that concur to
increase internal ventilation.

The lacing system is integrated into the upper and follows a light one in the medial part
undulation to allow a correct adaptation to the shape of the foot. The lace loops
they are obtained with buttonholes that allow you to do without plastic eyelets at all
advantage of wearability and reduction of plastic waste at the end of the shoe's life.
The tongue for laces ( TONGUE ) is sized with limited thickness in order to wrap the back
of the foot respecting the general comfort of the shoe. However, it has the particularity of being, in the part
terminal towards the instep, asymmetrical so as to better protect that portion of the neck of the
foot (external) where the soft tissues are most exposed to movement and compression stress
of the lacing itself. 
The heel counter is semi-rigid to stabilize the rear foot, which is useful for reducing the effect
torsional of the shoe during the support phases of the midfoot in order to allow the work of the
Achilles tendon in line with the pushing forces. The collar is instead soft thanks to the delicate
sponges used inside. There is also a webbing with a ring to facilitate the fit,
ribbon that in addition to having designs attributable to the Kenyan culture has embroidered the name ENDA nearby
to the figure 2%. This 2% identifies what ENDA reinvests from its profits in support of
development in Kenyan communities. 
The midsole is in blown EVA, very balanced and with a low profile, in fact it has a differential
antero - posterior of 4 mm (Drop) which invites the search for the best possible support of
midfoot. This does not mean that in the back, in the heel area, there is an insert that
increase the protection and overall stability of the shoe, the details of which we will see in a few
line.
The front design of the midsole is therefore lowered compared to the standard of traditional footwear
and is well suited to the increased volumes of the upper, where the toes are housed, to allow
that natural enlargement of the metatarsal structure in the support and thrust phase. The part
front is particularly flexible while maintaining an excellent balance between elastic return and
cushioning. This situation allows the entire skeletal muscle complex to work
tendon of the foot and ankle to achieve maximum efficiency. To guarantee efficiency, the
rear part of the midsole, in the heel area where there is the second layer of EVA (colored in
contrast) wraps the foot welcoming it with a slightly cupped shape to limit the
lateral movements of the foot, useful device in quick changes of direction as well as for the
overall stability of the shoe.
This solution is not necessarily the optimal solution for all runners, especially those more
slow and heavy that tend to have rear foot support, but this is a performance shoe
which can, for the runners just mentioned, be the second shoe for fast races or training
specific. In addition, the particular geometry and density of the midsole is well suited to fast walkers,
category constantly increasing among consumers.

The sole is in solid rubber with high resistance and traction, and is in full contact with the ground with the
particularity of having flexion grooves just in front of the metatarsals that generate 2 areas of
different sizes, one smaller positioned under the big toe and the other larger for the remaining 4 toes.
This solution is closely related to the choice of having a wider area for the support of the fingers
so that in the pre-detachment and detachment phases the metatarsal joints are in the condition of
express maximum efficiency. From this point of view, also the horizontal recess placed level
medial allows to dissect the more robust portion of the meso foot (the internal one) from the more
light (external) offering the latter a greater support surface.

The removable insole , in light and shaped Eva, has the purpose of obtaining comfort and contributes
to the overall cushioning of the shoe. As mentioned at the beginning, the shape of the shoe is
traditional in the medial and posterior part, while the anterior area, where the fingers and i
metatarsi, as mentioned, is slightly wider than the standard one is normally used to,
this precaution is essential to allow the toes to always find adequate
space in the phases preceding the detachment, when the metatarsal area tends, lowering, ad
widen to optimize the thrust phase.

Also for the ITEN there is no lack of details related to Kenyan culture , and in addition to the aforementioned ribbon
to facilitate the fit, we find on the midsole is the word HARAMBEE. Harambee (Ha-rum-bay) is the
Kenya's official motto, which in the Swahili language, means "let's all get together" and is used for
refer to times when communities come together to accomplish something that individuals do not
they could do it on their own. The detail of the 12 grooves in the outer portion of the midsole are the
reference to the date of December 12, Jamhuru Day, the day in which Kenya obtained in 1963
independence and then exactly one year later to become a republic.
The logo, which represents the tip of a spear, is then present both on the upper and on the sole almost a
wanting to leave a trace of the passage of Kenyan culture.

Finally a note on the color charts where the variety of colors of the ENDA models and theirs
pairing takes up the characteristic colors of the plumage of some of the most common birds of the
highlands of Kenya.
TECHNICAL NOTES → ITEN 2
Neutral shoe
Gr. 245 - 9 US man - 10,5 US woman
Drop - 4 mm
EVA Midsole & double density Midsole
High density rubber sole
Upper engineered mesh
Made in Kenya
2021.05.24 GG