Tel/Fax: +39 055.828315 [email protected] / Facebook
Tel/Fax: +39 055.828315 [email protected] / Facebook
Motus Triathlon
Cart empty 🛒
Manufacturer
Sports Passion

News on Triathlon, cycling, running and Swimming

The latest news from the Joomla! Team

PROLOG TOUCH: NEW SIZE DIMENSION

In the Prologo range of cycling saddles came a new one: the DIMENSION saddle.
An innovative saddle for both size and performance. The strengths of the Prologo Dimension saddle are Comfort, Lightness, Performance and Perineal Protection from annoying compressions.
The saddle has a short "nose", about 3-3.5 cm shorter than the traditional saddles, in order to eliminate any annoying contact in the front area, especially in the run-in stages where the cyclist stays more aerodynamic .
The shape is thus shorter and wider than the traditional cycling saddles. This new model is only 245 millimeters long, has a width of 143 mm and a weight of 158 grams (Nack version). The support surface is wide but is also designed to allow freedom of movement to the cyclist's legs. The shape is designed to take pressure from the most delicate parts, an advantage that will be especially appreciated in "running" position with low hands on the handlebar.
The greater saddle width allows you to distribute the weight of the cyclist on a larger surface, benefiting comfort in longer outlets.
The open PAS channel runs along the saddle in the longitudinal direction, eliminating pressure on the perineal area, thus reducing the risk of prostate trouble.

ARGON18 E119 THREE "MORE FAST OF A CUTE P5"

The Canadian brand Argon 18 competes with Cervelo with four new TT bikes based on two platforms - E117 Tri (UCI-legal) and E119 Tri (UCI no legal) - affirming that the second of these is faster than a P5 in real terms pedaling.

Both bicycles are designed to offer features and speeds, and are available in standard and 'plus' versions, featuring a range of accessories to contain essential elements for race, nutrition and hydration.
 
E119 Tri +
The E119 is not a development of the previous E118 Next TT bike in the Argon range. Rather, brand engineers have created a completely new platform from scratch to try to beat the bicycle of another Canadian company - the Cervélo P5.
Argon 18 used CFD technology to design the new chassis, consciously taking the decision to sacrifice aerodynamic performance at 0 degree angles in return for better performance than the realistic P5 at 5 or 20 degrees. Argon 18 measures its aerodynamic performance in terms of CDA (and publishes wind data in this format). With this standard, the E119 Tri is 14.89 percent more aerodynamic than the E118 Next, which was used by the professional Bora-Argon 18 team.
The chassis has deep tubes, low back lower lining and a clean, integrated front. Argon 18 says the weight of the chassis is 1,200 g, 300 grams lighter than the E118 Next, launched at Eurobike last year.
The practical elements include a simple centering brake on the front, covered by a fairing that doubles as a guide for the cable in order to maintain the brake calibration. It's lighter than a Dura-Ace brake caliper.
The rear brake has been moved over the vertical lining and is located in a fully horizontal position to minimize drag. In order to allow this positioning, Argon 18 engineers have developed a rotating cam wedge that activates the gripper.
The path of the brake cable crosses the handlebars, continues down from the steering tube then into the oblique tube and finally from the lower end into the wing tube where it is attached to the cam wedge. There is also a brake liner, which retains the chassis aerodynamic lines, and a cover under the tube to protect it from splashing the road.
Both brakes are designed to accommodate 28mm rims and tires, making life much easier for both removal and compatibility. Simple screws on the sides allow you to adjust the holes in the fairing, so you do not need to remove them during assembly.
Argon 18 also wanted to meet the needs of long-distance athletes. In order to avoid ruining all their hard work on the chassis because of aftermarket storage solutions (hydration and accessories), Argon engineers 18 have also designed storage and hydration systems.
The Tailwind is a rear-mounted system that has useful space to carry up to three luggage holders. It securely attaches through a bar that fits into the oversized cable carbon section on which the Ritchey bracket clamp is mounted.
 
In its original configuration, two bottles are placed on the sides of a large plastic storage container. It may seem like something too much, but Argon 18 says its use helps to fill the low pressure area behind a cyclist, giving a small advantage of 0.8 percent, but also allowing it to contain the most part of your essentials to the competition .
Cookie tray instead is a simple plastic food container that wraps the top tube, allowing easy access to power through a rubber cover. The Tri + is also equipped with AeroZ of Torhans among the front aerodynamic appendages, offering cyclists the chance to place a tank - unlike Scott Plasma 5 or the new Canyon Speedmax prototype.
In your triathlon specialized MOTUS online store you can find the E119TRI + frameset at less than 4500 euros ( HERE ). The complete bike is then available for sale with any type of mounting in terms of wheels, transmission unit, components.
The 'normal' E119 Tri uses a slightly different carbon layup, giving a bit of weight and presenting a seat with a slimmer support.
The frameset of the standard E-119 TRI model is on sale by MOTUS at 3.863 euros ( HERE ). Also for this chassis it is possible to provide mountings with wheels, transmission group and components as desired.
E-117 TRI PLUS
The Argon 18 is also launching the E117 Tri +, a truly practical option for those who want a stable handlebar control - albeit with the advantage of the Argon 18 Aero 3D steering tube extensors designed to alter the " Stack height without losing stiffness .
The bike uses exactly the same fork as the NITROGEN PRO aero road bike model, the 340g weight with TRP brake integrated on the rear edge. That ultra-low weight is combined with a 1,300-g frame that makes the E117 Tri + a great choice for cyclists who need a bicycle that can behave well even uphill. The rear brake is always TRP, positioned at the top of the vertical creams just like Nitrogen.
Argon 18 says the E-117 is nearly as fast as the E118 Next and is much easier to use - thanks to a less integrated cockpit - and comes with Cookie Jar, Tailwind and Torhans additions, perfect for those who makes longer distance workouts and easy to remove for any UCI sanctioned races you want to do.
The E-117 TRI PLUS chassis kit is available from MOTUS at the price of 2,612 euros (HERE) or in the standard version at the price of 1,848 euros (HERE).
Starting with the ARGON18 E-117 frameset you can set up complete bikes with components as desired.

BONT CYCLING SHOES: ONLINE ACQUISTING FROM MOTUS

BONT is a brand founded in 1975 and is the largest online shoe manufacturer of speed. It has always been at the avant-garde of using materials.

BONT is the first footwear company to use fiberglass in 1975, Kevlar in 986 Kevlar and finally carbon in 1989 (the first cycling shoe made with carbon composite base in 2002).

The production of BOMNT CYCLING cycling shoes started in 2008. BONT CYCLING is a young brand but has an enviable palmarès in road, track and triathlon cycling.

For BONT cycling shoes here is the unique features that identify an exclusive product.

  • Leader in the industry for weight / rigidity ratio
  • Leader in the lowest soles sector
  • Fully thermoformable hull that lasts over time
  • Anti-stretch upper even in wet conditions
  • Thermal stabilization
  • True anatomical shape:
  1. - Side foot support supporting the whole foot
  2. - Foot arch support, both medial and longitudinal
  3. - Monocoque wrapping your foot
The BONT philosophy is to prevent common problems due to inadequate biomechanical support

• Tendinite rotulea
• Sensation of the foot that warms up
• Nerve damage
• Back and neck pains
• Rotated basin

The fingers at the metatarsal level are left in their natural position and are not forced to follow aesthetic curves but absolutely not functional. Nerves, uncompressed, do not return heat sensations. The foot, left free to work in the most accurate anatomical position, can release all the power on a larger support surface.

The anatomical heel restraint system increases the stability of the foot at all stages of the pedal. No mechanical operation is needed to achieve this result, thus ensuring correct blood circulation and greater comfort.

The carbon sole has a lateral support that, keeping the foot and keeping it in the right position, avoids knee problems and back and back pain.

Bont so shoes built from the inside to create a unique structure.
The 'latest' mold has been made from a combination of the latest technology and over 36 years of experience. Bont used the data of 20,000 laser scanners combined with 36 years of skating footwear production experience and continuous feedback from professional cyclists to create one of the best cycling shoes.
Resistant in time : The plantar is home made with a modelable thermoformable EVA. The plantar has 65A hardness and only 3 mm thick that makes it extremely lightweight.
Interior : The interior has been chosen from hundreds of options. They are lightweight, resistant and eliminate odors and do not ruin with sweat.

Comfort: Add Memory Foam. Bont's Memory Foam has been rigorously tested in a vice for a period of 6 months and maintains its shape. It is also tested for days with impact test equipment. The foam is closed cells so it does not absorb moisture and is also extremely light.
Longevity: Anti-stretch ribbons are then added. These belts are similar to a safety belt to ensure that the shoe does not deform in time or in extreme conditions.
Unmatched weight / rigidity ratio
Bont manually applies all carbon fibers, paying particular attention to the stresses they will have to endure during use. Each layer is positioned with a precise purpose. Bont uses a braided carbon outside and carbon unidirectional inside. Unidirectional carbon has only half the wires compared to the braided one so it weighs less.

100% carbon-based construction with patented resin
• Bont uses a custom carbon weft produced by Torayca (Toray).
• The special resin developed by Bont is applied by hand. This resin is designed to keep the shape once thermoformed.
• Unlike other shoes that can only be modeled at some points, all Bont shoes can be molded by providing not only with the more cycling shoe
anatomical on the market today, but also with the ability to tailor the size of the shoe to give a personal fit.
• Kevlar patented fabric is joined to the shoe by inserting it between the layers of carbon fiber by creating a monocoque structure.

YOU CAN PURCHASE ONLINE AT DISCOUNTED PRICE CYCLING SHOES MODELS BONT CYCLING

ROAD MODELS AS BONT VAYPOR + VAYPOR S BLITZ RIOT

ROAD MODELS AS RIOT MTB AND VAYPOR XC

CRONO AND TRIATHLON MODELS AS CRONO AND ZERO +

FOR DETAILS AND PURCHASES FIND ALL MODELS BONT CYCLING HERE: SHOP NOW

SELLE ISM: ALWAYS MORE LEADERS IN KONA

The ISM cycling saddles, famous for their comfort, are still growing in the most famous triathlon race in the world.
KONA -. HAWAII 2017: 828 !!
This is the record number of ISM saddles on the 2018 edition of the IRONMAN World Championships at KONA, HAWAII.
In practice, 1 athlete on 3 pedaled on an ISM saddle along the famous QUEEN K.
We can say that the success of the "two-point saddle" does not stop. The undoubted benefits of pedaling are at the heart of the success of the ISM saddle.
The patented form provides a different support that eliminates annoyances and annoyances. With the ISM saddles, the support is no longer on the perineal area but on the ischial bones, leaving the nails and nerves passing through the perineum free from annoying and harmful compressions.
ISM saddles are unisex, as they work both for men and women, and help reduce the pain and annoyance associated with longer bike trips.
Today, many triathlon and cycling professionals (especially cycling on track) use ISM as well as for its comfort even for its shape that allows to keep the aero positions more comfortable over time.
MOTUS is ISM's dealer: in its catalog you can find all ISM models
The S (short) series is very suitable for triathlon and racing against time: PS1.0 and PS1.1
The L (long) series is particularly suitable for comfort: PL1.0 and PL1.1
The series PN (narrow) or narrower odds indicated for traditional cycling: PN1.0 and PN1.1 and PN2.1
Also the PM2.0 model suitable for off-road cycling, X-country MTB

POC SNOW HELMETS: NEW TECHNOLOGY "SPIN" FOR THE MAXIMUM PROTECTION

In POC we never give up on our mission to do everything we can to reduce the consequences of accidents for athletes and we are constantly looking for new materials and innovations to enhance safety. SPIN swabs , our new patented technology, have been developed to reduce the impact of falls, reducing oblique forces in any direction.
The most common type of fall produces angled or oblique impact on a surface, which can lead to a rotation of the helmet and head. Research has shown that the force needed to cause severe head injuries is much lower in the case of an oblique impact rather than in the case of a linear impact, so protection against this type of fall is of vital importance.

The SPIN pads are designed to be able to dissipate the forces in any direction, so they work to improve the protection against oblique bumps by allowing the helmet to move over the head.
Placed inside a helmet and in direct contact with the user's head, the SPIN pads replace the traditional flat rubber padding and are able to dissipate any force in any direction so as to reduce the force transmitted to the brain in case of fall.
Spin pads provide comfort and convenience as well as increased safety. By replacing the traditional pads with a technologically advanced system, we have been able to provide an additional level of protection without altering the shape or comfort of our helmet.
 
In the range of POC helmets for winter skiing and sports, the new POC SPIN technology is available in models such as ARTIC SL SPIN, SKULL ORBIC COMP SPIN, AURIC CUT SPIN, AURIC CUT BACKCOUNTRY SPIN, SKULL ORBIC X SPIN.
 
 
 
 
Joomla SEF URLs by Artio
Realizzazione Ecommerce Siti Web e Grafica Web agency Arezzo Siti Web e Grafica
↑